Display items

Trip information contents

Trip information items displayed can be switched by pressing the “ENTER” switch upwards or downwards.

• Outside temperature display

Displays the outside temperature

Displays the outside temperature

The temperature range that can be displayed is from -40 °F (-40 °C) to 122 °F (50 °C).

Front tire angle

The direction of the front tires is displayed

The direction of the front tires is displayed

The tire direction is displayed in 3 stages for both left and right, in accordance with the angle of the tire.

Driving range

Displays the estimated maximum distance that can be driven with the quantity

Displays the estimated maximum distance that can be driven with the quantity of fuel remaining

• This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.

• When only a small amount of fuel is added to the tank, the display may not be updated.

• When refueling, turn the “ENGINE START STOP” switch off. If the vehicle is refueled without turning the “ENGINE START STOP” switch off, the display may not be updated.

Average fuel consumption after refueling

Displays the average fuel consumption since the vehicle was last refueled

Displays the average fuel consumption since the vehicle was last refueled

Use the displayed average fuel consumption as a ref- erence.

Current fuel consumption

Displays the current rate of fuel consumption

Displays the current rate of fuel consumption

Average fuel consumption and Eco Driving Indicator Zone Display

Displays the average fuel consumption since the function was reset

Displays the average fuel consumption since the function was reset

• The function can be reset by pressing the “ENTER” switch for longer than 1 second when the average fuel consumption is displayed.

• Use the displayed average fuel consumption as a reference.

Average vehicle speed

Displays the average vehicle speed since the engine was started or the function

Displays the average vehicle speed since the engine was started or the function was reset

The function can be reset by pressing the “ENTER” switch for longer than 1 second when the average vehicle speed is displayed.

Elapsed time

Displays the elapsed time since the function was last reset

Displays the elapsed time since the function was last reset

The function can be reset by pressing the “ENTER” switch for longer than 1 second when the elapsed time is displayed.

Display off

A blank screen is displayed

Electronic features control contents

• Multi-terrain Select (if equipped)

• Intuitive parking assist (if equipped)

• AFS (Adaptive Front-lighting System) (if equipped)

• Second start mode

Other contents

• Multi-terrain Select display (if equipped)

• Intuitive parking assist display* (if equipped)

• Crawl Control display* (if equipped)

• Dynamic radar cruise control display* (if equipped)

• LDA (Lane Departure Alert) display* (if equipped)

• Warning messages

Automatically displayed when a malfunction occurs in one of the vehicles systems.

• Customization

Settings (e.g.available language) can be changed.

*: Automatically displayed when the system is used

Electronic features control can be turned on/off when

“ENGINE START STOP” switch is in IGNITION ON mode.

System check display

After turning the “ENGINE START STOP” switch to IGNITION ON mode, “CHECKING” is displayed while system operation is checked. When the system check is complete, the normal screen will return

Conditions for ending electronic features control

In the following situations, the electronic features control will end automatically:

• The menu switch is pressed

• Intuitive parking assist display starts operating

• The Crawl Control is operated

• The dynamic radar cruise control is operated

• LDA (Lane Departure Alert) is operated

• A warning message appears after the electronic features control screen is dis- played

Eco Driving Indicator

1.Eco Driving Indicator Light

1.Eco Driving Indicator Light

During Eco-friendly acceleration (Eco driving), Eco Driving Indicator Light will turn on.

2. Eco Driving Indicator Zone Display

Suggests Zone of Eco driving with current

Eco driving ratio based on acceleration.

3. Zone of Eco driving

4.Eco driving ratio based on acceleration

If the vehicle exceeds Zone of Eco driving, the right side of Eco Driving Indicator Zone Display will blink and Eco Driving Indicator Light will turn off.

Eco Driving Indicator Light will not operate in the following conditions:

• The shift lever is in anything other than D.

• The vehicle is set to second start mode.

• The vehicle speed is approximately 81 mph (130 km/h) or higher.

Outside temperature display

In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change:

• When the vehicle is stopped, or moving at low speeds (less than 12 mph [20 km/h]) • When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)

When “--” or “E” is displayed

The system may be malfunctioning. Take your vehicle Lexus dealer.

When disconnecting and reconnecting battery terminals

The following information data will be reset:

• Average fuel consumption after refueling

• Average fuel consumption

• Average vehicle speed

• Elapsed time

CAUTION

The multi-information display at low temperatures

Allow the interior of the vehicle to warm up before using the information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or serious injury.

    See also:

    Operating HomeLink®
    Press the appropriate HomeLink® button. The HomeLink® indicator light should come on. The HomeLink® compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as lo ...

    Selecting vehicle height
    Operating the switch changes vehicle rear height as follows: 1. Higher 2. Lower Vehicle height can be adjusted only when the engine is running. The selected height mode will be shown on the rear ...

    Emergency flashers
    The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To tur ...