Display items
Driving range
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining
• This distance is computed based on your average fuel consump- tion. As a result, the actual dis- tance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the dis- play may not be updated.
• When refueling, turn the “ENGINE START STOP” switch off. If the vehicle is refueled with- out turning the “ENGINE START STOP” switch off, the display may not be updated.
Average fuel consumption after refueling and current fuel consumption
Displays the average fuel con- sumption since the vehicle was last refueled and the current rate of fuel consumption
Use the displayed average fuel consumption as a reference.
Average fuel consumption
Displays the average fuel con- sumption since the function was reset
• The function can be reset by pressing and holding the “RESET” switch when the aver- age fuel consumption is dis- played.
• Use the displayed average fuel consumption as a reference.
Average vehicle speed
Displays the average vehicle speed since the function was reset
The function can be reset by press- ing and holding the “RESET” switch when the average vehicle speed is displayed.
Elapsed time
Displays the elapsed time since the function was last reset
The function can be reset by press- ing and holding the “RESET” switch when the elapsed time is displayed.
Air conditioning system display
See also:
Lubrication system
*: The engine oil capacity is a reference quantity to be used when exchanging.
Warm up and turn off the engine, wait more than 5 minutes, and check the oil
level on the dipstick.
- Engine ...
Electronic key battery
Replace the battery with a new one if it is discharged.
- You will need the following items:
l Flathead screwdriver (To prevent damage to the key, cover
the tip of the screwdriver with rag.)
l S ...
Talk on the Bluetooth phone
While you are talking on the phone, this screen is displayed. You can do the
operation below on the screen.
To adjust the volume of the other party’s voice:
Touch “–” or “+” or use t ...