AFS (Adaptive Front-lighting System) (if equipped)
AFS (Adaptive Front-lighting System) secures excellent visibility at inter- sections and on curves by automatically adjusting the direction of the light axis of the headlights according to vehicle speed and the degree of the tire’s angle as controlled by steering input.
AFS operates at speeds of 6 mph (10 km/h) or higher.
Deactivating AFS
1. Press the menu switch.
The multi-information display will change modes to electronic fea- tures control mode.
2. Press the “ENTER” switch upwards or downwards until “AFS” appears.
Press the “ENTER” switch to change to “OFF”.
The “AFS OFF” indicator will be displayed.
Each pressing of the switch turns “AFS” on and off.
Press the menu switch to change to the normal display.
Daytime running light system
• To make your vehicle more visible to other drivers, the headlights turn on auto- matically (at a reduced intensity) whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night.
For the U.S.A.: Daytime running lights can be turned off by operating the switch.
• Compared to the headlights, the daytime running light system offers greater durability and consumes less electricity, so it can help fuel economy.
Headlight control sensor
The sensor may not function properly if an object is placed on the sensor, or anything that blocks the sensor is affixed to the wind- shield.
Doing so interferes with the sensor detecting the level of ambient light and may cause the automatic headlight system to malfunction.
Automatic light off system
• When only the tail lights come on: The parking/front side marker, tail, license plate and fog lights turn off if the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off and the driver’s door is opened.
• When the headlights come on: The headlights, parking/front side marker, tail, license plate and fog lights turn off 30 seconds after a door or the glass hatch is opened and closed. (The lights turn off immediately if on the key is pressed after all the doors are locked.) To turn the lights on again, turn the “ENGINE START STOP” switch to IGNITION ON mode, or turn the light switch off once and then back to or .
Automatic headlight leveling system (if equipped)
The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users.
If the “AFS OFF” indicator flashes (if equipped)
It may indicate a malfunction in the system. Contact your Lexus dealer.
Customization
Settings (e.g. light sensor sensitivity) can be changed.
NOTICE
To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not running.
See also:
Using the video mode
Push “VIDEO” to select the video mode.
Before switching to the video mode, connect the audio−video equipment to the
A/V input port.
When “Speaker Output” is off, any audio− v ...
Using the video mode
Using the port
Open the cover.
The A/V input port is composed
of 3 input ports.
Yellow: Video input port
White: Left channel audio input
port
Red: Right channel audio input
port
Selecti ...
Engine compartment
1 Power steering fluid reser-
voir
2 Engine oil level dipstick
3 Engine oil filler cap
4 Brake fluid reservoir
5 Fuse box
6 Washer fluid tank
7 Battery
8 Cooling fans
9 Condenser
10 Radia ...