Wide view front & side monitor

This system can display the wide view front monitor and the side monitor.

The wide view front monitor uses a super-wide angle lens to display on screen the areas to the left and right of the vehicle and the blind spots to the front of the vehicle. This system helps the driver check for approaching cars, bicycles and pedestrians when at intersections with poor visibility.

The side monitor uses a camera installed in the passenger’s side outside rear view mirror to display on screen the area to the right of the vehicle, helping the driver check this area.

Vehicles with a navigation system

Refer to the “Navigation System Owner’s Manual”.

Vehicles without a navigation system

On/off

On/off

The camera image is displayed when the wide view front & side monitor switch is pressed.

Changing the display

The screen changes as follows with each press of the wide view front & side monitor switch.

The wide view front monitor display and trip information are not accessi- ble

The wide view front monitor display and trip information are not accessi- ble when the shift lever is in R.

On vehicles with Multi-terrain Select, the Multi-terrain Monitor can be switched to by pressing the wide view front & side monitor switch while the system is operating.

See also:

Instrument cluster light control switch
The brightness of the instrument cluster lights can be adjusted. 1. Brighter 2. Darker The meters and display illuminate when The “ENGINE START STOP” switch is in IGNITION ON mode. Instrume ...

Glossary of tire terminology
*: Table 1 Occupant loading and distribution for vehicle normal load for various designated seating capacities ...

Scanning radio stations (excluding XM® Satellite Radio)
 - Scanning the preset radio stations Press and hold the “SCAN” button until you hear a beep. Preset stations will be played for 5 seconds each. When the desired station is reached, ...