Adjusting the settings manually
- Basic setting
Vehicles without a rear automatic air conditioning system
To turn on the air conditioning
system and adjust the fan speed, press “
” on
to increase the fan speed and
“
” to decrease the fan speed.
Press to turn the fan off.
To adjust the temperature setting,
press “
” on the temperature control
button on the driver’s side to increase the temperature and “
”
to decrease the temperature.
The air conditioning system switches between individual and simulta- neous modes each time the “DUAL” button is pressed.
When the “DUAL” button is pressed (the indicator on the “DUAL” but- ton is on) or the passenger’s side temperature control button is pressed, the temperature for the driver and passenger seats can be adjusted separately.
To change the air outlets, press
“<” or “>” on
.
The air outlets used are switched each time either side of the button is pressed. The air flow shown on the display indicates the following:
Vehicles with a rear automatic air conditioning system
To turn on the air conditioning
system and adjust the fan speed, press “
”
on
to increase the fan speed and “
”
to decrease the fan speed.
Press to turn the fan off.
To adjust the temperature setting,
press “
” on the temperature control
button on the driver’s side to increase the temperature and “
”
to decrease the temperature.
The air conditioning system switches between individual and simulta- neous modes each time the “3ZONE” button is pressed.
When the “3ZONE” button is pressed (the indicator on the “3ZONE” button is on), the front passenger’s side temperature control button is pressed or the “REAR/TEMP” button is pressed, the temperature for the driver’s, front passenger’s and rear seats can be adjusted separately.
To change the air outlets, press
“<” or “>” on
.
The air outlets used are switched each time either side of the button is pressed. The air flow shown on the display indicates the following:
Air flows to the upper body.
*1: Only the in automatic mode (Air may not always flow.)
*2: Vehicles without a rear automatic air conditioning system
Air flows to the upper body and feet.
*: Vehicles without a rear automatic air conditioning system
Air flows to the feet.
*: Vehicles without a rear automatic air conditioning system
Air flows to the feet and the wind- shield defogger operates.
The air intake is automatically switched to
(outside air) mode.
The air conditioning system oper- ates automatically.
*: Vehicles without a rear automatic air conditioning system
- Switching between outside air and recirculated air modes
Vehicles without a rear automatic air conditioning system
Press .
The mode switches between (recirculated
air mode) and
(out- side air mode)
modes each time the button is pressed.
Vehicles with a rear automatic air conditioning system
Press .
The mode switches among (recirculated
air mode), automatic and
(outside air
mode) modes each time the button is pressed.
When the system is switched to automatic mode, the air conditioning sys- tem operates automatically.
See also:
Using the radio
Select radio mode on the source screen to display the control screen.
1. Selecting a preset station
2. Tuning the station
Selecting a preset station
Push “ ” or “
” of “DISC·CH ...
General settings
Used for language selection and the on/
off settings of operation sounds and au-
tomatic screen change.
1 Press the “SETUP” button.
2 Touch “General”.
3 Touch the items to be set.
...
Overview button and guidance screen
*: Press and hold the “PWR·VOL” knob for 3 seconds or more to turn off the
screen and restart the
navigation system. Do this when the vehicle-mounted device response is extremely
slow. ...