- Receiving XM® Satellite Radio

Press the “SAT” button.

The display changes as follows each time the button is pressed:

“SAT1” → “SAT2” → “SAT3”

Turn the “TUNE/SEL” knob to select the desired channel in all the categories or press “ ” or “ ” on the “SEEK•TRACK” button to select the desired channel in the current category.

 - Setting XM® Satellite Radio channel prese

Select the desired channel. Press and hold the button (from the 1 but- ton to the 6 button) the channel is to be set to until you hear a beep.

 - Changing the channel category

Press “” or “” on the “TYPE•DISC” button.

 - Scanning the XM® Satellite Radio channels

• Scanning the channels in the current category

Press the “SCAN” button.

When the desired channel is reached, press the button again.

• Scanning the preset channels

Press and hold the “SCAN” button until you hear a beep.

When the desired channel is reached, press the button again.

 - Displaying text information

Press the “TEXT” button.

The display will show up to 10 characters.

The display changes as follows each time the button is pressed:

•  CH NAME

•  TITLE (SONG/PROGRAM TITLE)

•  NAME (ARTIST NAME/FEATURE)

•  CH NUMBER

 - When the battery is disconnected

All preset stations are erased.

 - Reception sensitivity

• Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XM® Satellite Radio.

• It is difficult to maintain perfect radio reception at all times due to the continually changing position of the antenna, differences in signal strength and surrounding objects, such as trains and transmitters.

• The radio antenna is mounted inside the rear spoiler and the rear window. To maintain clear radio reception, do not attach metallic window tinting or other metallic objects to the antenna wire mounted inside the rear window.

 - Receiving XM® Satellite Radio

An XM® Satellite Radio is a tuner designed exclusively to receive broadcasts pro- vided under a separate subscription. Availability is limited to the 48 contiguous states and 10 Canadian provinces.

• XM® subscriptions

For detailed information about XM® Satellite Radio or to subscribe:

U.S.A. Visit on the web at www.xmradio.com or call 1-877-515-3987.

Canada Visit on the web at www.xmradio.ca or call 1-877-515-3987.

• Radio ID

You will need the radio ID when activating XM® service or reporting a problem.

Select “CH000” using the “TUNE/SEL” knob, and the receiver’s 8-character ID number will appear.

• Satellite tuner

The tuner supports only Audio Services (Music and Talk) and the accompanying Text Information of XM® Satellite Radio.

 - If the satellite radio does not operate normally

If a problem occurs with the XM® tuner, a message will appear on the display. Refer to the table below to identify the problem, and take the suggested corrective action.

Contact the XM® Listener Care Center at 1-877-515-3987.

 - Certifications for the radio tuner

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by trying one or more of the following:

• Reorienting or relocate the receiving antenna.

• Increasing the separation between the equipment and receiver.

• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consulting the dealer or an experienced radio/TV technician for help.