Selecting and scanning a folder

 - Selecting a folder one at a time

Press the 6 (button to select the desired folder.) or 5 (button to select the desired folder.) button to select the desired folder.

 - Returning to the first folder

Press and hold the 5 (you hear a beep.) button until you hear a beep.

 - Scanning the first file of all the folders

until you hear a beep. Press and hold the “SCAN” button until you hear a beep.

The first ten seconds of the first file in each folder will be played.

press the “SCAN” button again. When the desired folder is reached, press the “SCAN” button again.

Fast-forwarding and reversing files

To fast-forward or reverse, press and hold “or “” on the “SEEK•TRACK” button until” or “you hear a beep.” on the “SEEK•TRACK” button until you hear a beep.

    See also:

    Deleting the registered data
    Select “Delete Entry” using a voice command or the “TUNE/ SEL” knob. Pattern A Select the data to be deleted by either of the following methods, and select “Confirm” using a voice ...

    Emergency flashers
    Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, push the switch once again. NOTICE ...

    Installing tire pressure warning valves and transmitters
    When replacing tires or wheels, tire pressure warning valves and trans- mitters must also be installed. When new tire pressure warning valves and transmitters are installed, new ID codes must be ...