Setting speed dials
Select “Set Speed Dial (Speed Dial)”
using a voice command or the “TUNE/SEL” knob.
Pattern A
Select the data to be registered
as a speed dial by either of the following methods, and select “Confirm” using a
voice command or the “TUNE/SEL” knob:
a. Press the talk switch, say the desired name.
b. Press the talk switch, and say “List Names”. When the desired name is read aloud, press the talk switch.
Pattern B
Select the desired data using the
“TUNE/SEL” knob.
Select the desired preset button,
and register the data into speed dial by either of the following methods:
a. Press the desired preset button, and select “Confirm” by using a voice command or the “TUNE/SEL” knob.
b. Press and hold the desired preset button.
See also:
Selecting vehicle height
Operating the switch changes vehicle rear height as follows:
1. Higher
2. Lower
Vehicle height can be adjusted only when the engine is running.
The selected height mode will be shown on the rear ...
Engine coolant
The coolant level is satisfactory if it is between the “F” and “L” lines on the
reservoir when the engine is cold.
1. Reservoir cap
2. Full
3. Low
If the level is on or below the “L ...