Brake fluid
- Checking fluid level
The brake fluid level should be between the “MAX” and “MIN” lines on the tank.
- Adding fluid
Make sure to check the fluid type and prepare the necessary item.
- Brake fluid can absorb moisture from the air
Excess moisture in the fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid.
CAUTION
- When filling the reservoir
Take care because brake fluid can harm your hands or eyes and damage painted surfaces.
If fluid gets on your eyes, flush the affected area with clean water immediately.
If you still experience discomfort, see a doctor.
NOTICE
- If the fluid level is low or high
It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high.
If the reservoir needs frequent refilling, it may indicate a serious problem.
See also:
Locking the driver’s door from the outside without a key
Move the inside lock button to the
lock position.
Close the door.
The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or
IGNITION ON mode, or the electronic key is ...
Installation with LATCH system
Fold the seatback forward. Then return the seatback and secure it at the first
lock position (most upright position).
Type A
Flip the cover (vehicles with third seats), and latch the hooks of ...
Fast-forwarding and rewinding songs
To fast-forward or rewind, press and hold “”
or “” on the “SEEK•TRACK” button until
you hear a beep. ...