Customizing vehicle features

It is possible to customize certain vehicle features using the menu switch and the “ENTER” switch.* When customizing vehicle features, ensure that the vehicle is parked in a safe place with the shift lever in P and the parking brake set.

Press and hold the menu switch to display customization mode.

Press and hold the menu switch to display customization mode.

1. Press the “ENTER” switch upwards or downwards to select the item to be customized.

1. Press the “ENTER” switch upwards or downwards to select the item to be customized.

2. Press the “ENTER” switch to confirm.

1. Press the “ENTER” switch upwards or downwards to select the desired setting

1. Press the “ENTER” switch upwards or downwards to select the desired setting for the item being customized.

2. Press the “ENTER” switch to confirm.

When customization is completed, press the menu switch to clear the customization screen.

*: For instructions on customizing vehicle features using the screen of the navigation system, refer to the “Navigation System Owner’s Manual”.

    See also:

    Automatic High Beam
    The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off ...

    Tire Pressure Warning Reset Switch
    This switch can initialize the tire pressure warning system Press and hold the switch when you change the tire inflation pressure. For details, see the “Owner’s Manual”. ...

    Installing tire pressure warning valves and transmitters
    When replacing tires or wheels, tire pressure warning valves and trans- mitters must also be installed. When new tire pressure warning valves and transmitters are installed, new ID codes must be ...