Reordering destinations
When more than one destination is set, you can change the arrival order of the destinations.
1. Touch “Route”.
2. Touch “Reorder”.
3. Touch the desired destination and touch “Move Up” or “Move Down” to change the arrival order.
4. Touch “OK”.
5. After selecting the destinations, touch “OK”. The system searches for the guidance route again, and displays the entire route.
See also:
Replacing a flat tire
Chock the tires.
Pry off the wheel ornament, using the beveled end of the wheel orna- ment remover
as shown.
Slightly loosen the wheel nuts (one turn).
Assembling the jack handle.
Remove ...
Adjusting the sensitivity of the air intake control in automatic mode (vehicles
with a rear automatic air conditioning system)
Press for 2 or more seconds.
Press “” (increase) or “”
(decrease) on the temperature control button on the driver’s side.
From - 3 (low) to 3 (high) can be set.
...
Power easy access system
When the driver enters and exits the vehicle, the driver’s seat and steer- ing
wheel will automatically perform the following operations:
Exiting the vehicle: When all of the following actions ...