Talk on the Bluetooth phone
While you are talking on the phone, this screen is displayed. You can do the operation below on the screen.
To adjust the volume of the other party’s voice:
Touch “–” or “+” or use the volume switch of the steering wheel.
To hang up the phone:
Touch or push
of the steering wheel.
To mute your voice:
Touch “Mute”.
To input a Key:
Touch “0−9”.
To transfer the call:
Touch “Call Transfer”.
You cannot change from Hands−free call to cellular phone call while driving.
When you change from cellular phone call to Hands−free call, the Hands−free screen will be displayed and you can operate it on the screen.
Transferring method and behavior are different depending on the cellular phone which you have.
For the operation of the phone, see the manual that comes with your cellular phone.
When you select “0−9”
Touch the desired number to input the key.
To hang up the phone:
Touch or push
of the steering wheel.
This cannot be operated while driving.
If the continuous tone signal is registered in a phonebook, this screen appears.
(If not registered, “Send” and “Exit” are not displayed.) Confirm the number displayed on the screen and touch “Send”. The number before marked sign will be sent.
When you touch “Exit”, this function will be finished and normal tone screen appears.
To hang up the phone:
Touch or push
of the steering wheel.
The continuous tone signal is the marked sign (p or w) and the number following phone number. (ex. 056133w0123p#1 ) You can do this operation when you want to operate an answering machine or use a telephone service in bank for example.
You can register the phone number and the code number in the phonebook.
By voice recognition
You can operate “Mute” and “Send Tones” by giving a command during a call.
The operating procedure is similar to other voice recognition. (For the operation of voice recognition, see “Voice command system” on page 44.)
Interrupt call
When a connected call is interrupted by a third party, this screen is displayed.
Touch or push
of the steering wheel to start talking
with the other party.
Touch or push
of the steering wheel to refuse the
call.
Everytime you touch or push
of the steering wheel while interrupt
call, the other party will be switched.
If your cellular phone is not accepted for HFP Ver. 1.5, this function can not be used.
NFORMATION
Interrupt call operation may differ depending on your phone company and cellular phone.
See also:
Adding destinations
You can add destinations and search again for the routes.
1. Touch “Route”.
2. Touch “Add”.
3. Input an additional destination in the same way as the destination search.
4. Touch the ...
Scrapping of your Lexus
The SRS airbag and seat belt pretensioner devices in your Lexus contain explosive
chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners
left as they are, this may caus ...
If a warning light turns on or a warning buzzer sounds...
Calmly perform the following actions if any of the warning lights turn on
or flash. If a light turns on or flashes, but then turns off, this does not necessarily
indicate a malfunction in the syst ...