Setting the phonebook

“Setting the phonebook” is accessed from the “Contacts” screen.

1. Push the “SETUP” button.

2. Touch “Phone”.

3. Touch “Phonebook”.

4. Touch “Manage Contacts”.

4. Touch “Manage Contacts”.

Please refer to the following pages for each setting.

Please refer to the following pages for each setting.

You can also display the “Contacts” screen in the following way.

1. Push the “INFO/PHONE” button.

2. Touch “Phone”.

3. Touch “Contacts”.

4. Touch “Options”.

4. Touch “Options”.

5. Touch “Manage Contacts”.

5. Touch “Manage Contacts”.

Transferring a phone number

You can transfer the phone numbers in your Bluetooth phone to the system.

The phonebook manages a maximum of 4 phonebooks in all. The data for 1000 contacts (up to 3 numbers per contact) can be registered in total of phonebooks.

Transfer it while the engine is running.

1. Touch “Transfer Contacts”.

1. Touch “Transfer Contacts”.

2. Touch “Replace Contacts” or “Add Contacts”.

2. Touch “Replace Contacts” or “Add Contacts”.

In case that the phonebook contains phonebook data, this screen is displayed.

3. Transfer the phonebook data to the system using the Bluetooth phone.

3. Transfer the phonebook data to the system using the Bluetooth phone. This screen appears while transferring. To cancel it, touch “Cancel”. If the transferring is interrupted on the way, the phonebook data transferred until then can be memorized in the system.

When you have touched “Replace Contacts”: If your cellular phone does not support PBAP or OPP service, you can not use this function.

If your phone supports PBAP service, you can transfer the phonebook data without operating your phone.

If your phone does not support PBAP service, you must transfer the phonebook data by operating your phone.

When you have touched “Add Contacts”:

If your cellular phone does not support OPP service, you can not use this function.

You can transfer the phonebook data only by operating your phone.

4. In case that you have touched “Add Contacts”, this screen is displayed.

4. In case that you have touched “Add Contacts”, this screen is displayed.

If you want to transfer another phonebook, touch “Yes”.

When another Bluetooth device is connected

When another Bluetooth device is currently connected, this screen is displayed.

When another Bluetooth device is currently connected, this screen is displayed.

If you want to disconnect it, touch “Yes”.

INFORMATION

Bluetooth audio will disconnect during transfer on phonebook data.

In this case, it will reconnect automatically when data transfer finishes.

(It will not be reconnected depending the phone you are using.)

Registering the phonebook data You can register the phonebook data.

Up to 3 numbers per person can be registered.

1. Touch “New Contact”.

1. Touch “New Contact”.

2. Use the software keyboard to input the name and touch “OK”.

2. Use the software keyboard to input the name and touch “OK”.

3. Input the phone number and touch “OK”.

3. Input the phone number and touch “OK”.

If you want to use the tone signal after the phone number, input the tone signal too.

4. Select the phone type.

4. Select the phone type.

5. When two or less numbers in total are registered to this contact, this

5. When two or less numbers in total are registered to this contact, this screen is displayed.

When you want to add a number to this contact, touch “Yes”.

Editing the phonebook data

You can register the phone number in “Phone#1”, “Phone#2” and “Phone#3” separately.

1. Touch “Edit Contacts”.

1. Touch “Edit Contacts”.

2. Select the data you want to edit.

2. Select the data you want to edit.

3. Touch “Edit” for the desired name or number.

3. Touch “Edit” for the desired name or number.

4. Edit the name or the number. (See “ Registering the phonebook data” on page 363.) 5. When you complete the edit, touch “Save”.

You can also display the “Edit Contact” screen in the following ways.

From “Contact Data” screen

1. Push the “INFO/PHONE” button.

2. Touch “Phone”.

3. Touch “Contacts”.

4. Select the desired data from the list.

5. Touch “Options”.

5. Touch “Options”.

6. Touch “Edit Contact”.

6. Touch “Edit Contact”.

From “Call History” screen

1. Push the “INFO/PHONE” button.

2. Touch “Phone”.

3. Touch “Call History”.

4. Select the desired number from the list.

5. Touch “Add Contact” or “Update Contact”.

5. Touch “Add Contact” or “Update Contact”.

6. In case that you have touched “Update Contact”, this screen is displayed.

6. In case that you have touched “Update Contact”, this screen is displayed.

Select the desired data from the list.

Deleting the phonebook data

You can delete the data.

When you release your car, delete all your data on the system.

1. Touch “Delete Contacts”.

1. Touch “Delete Contacts”.

2. Select the desired data or touch “Select All”, then touch “Delete”.

2. Select the desired data or touch “Select All”, then touch “Delete”.

You can touch multiple data and delete them at the same time.

3. Touch “Yes”.

3. Touch “Yes”.

You can also delete it in the following way.

1. Push the “INFO/PHONE” button.

2. Touch “Phone”.

3. Touch “Contacts”.

4. Select the desired data from the list.

5. Touch “Options”.

5. Touch “Options”.

6. Touch “Delete Contact”.

6. Touch “Delete Contact”.

7. Touch “Yes”.

7. Touch “Yes”.

INFORMATION

When you delete a Bluetooth phone, the phonebook data will be deleted at the same time.

    See also:

    Floor mats
    Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the f ...

    Repeat play
    Press the 2 (RPT) button. To cancel, press the 2 (RPT) button again. ...

    Reporting safety defects for U.S. owners
    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in ...