Touch screen operation
This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.)
• When a screen button is touched, a beep sounds.
NOTICE
● To prevent damaging the screen, lightly
touch the screen buttons with your finger
pad.
● Do not operate or rub the screen with a
ballpoint pen, a mechanical pencil, finger
nail, a pointy and/or hard object because
this will damage the screen.
● Do not use objects other than your finger
to touch the screen.
●When wiping the touch screen, it is advis-
able to wipe with a soft and dry cloth
wrapped around the finger. Do not use
chemical cleaners to clean the touch
screen. Also, be careful not to apply
excessive force on the screen.
INFORMATION
●If the system does not respond to touching a screen button, move your finger
away from the screen and then touch it
again.
●Dimmed screen buttons cannot be operated.
●To operate the touch screen, press touch
screen buttons properly with finger pad.
●When dew condensation occurs inside
the touch screen, it is sometimes difficult
to operate the display properly. In such
case, please leave the screen untouched
and do not operate the touch screen until
dew condensation disappears.
●The displayed image may become darker
and moving images may be slightly distorted when the screen is cold.
●In extremely cold conditions, the map
may not be displayed and the data input
by a user may be deleted. Also, the
screen buttons may be harder than usual
to depress.
●When the screen is viewed through
polarized sunglasses, a rainbow pattern
may appear on the screen due to optical
characteristics of the screen. If this is disturbing, please operate the screen with-
out polarized sunglasses.
See also:
Telephone settings
Bluetooth phones can be registered.
“Telephone settings” can be changed on the “Phone settings” screen.
1. Push the “SETUP” button.
2. Touch “Phone”.
Please refer to the foll ...
If you have repair delays questions
If you have questions or concerns
about your vehicle’s California emission
warranty coverage, please follow
the steps described.
You may also request information
from or report complaints to: ...
Capacity and distribution
Cargo capacity depends on the total weight of the occupants.
(Cargo capacity) = (Total load capacity) — (Total weight of occupants)
Steps for Determining Correct Load Limit —
1. Locate the stat ...