Rear window wiper and washer

The wiper operation is selected by moving the lever as follows:

Type A

1. Off

1. 2. Intermittent window wiper operation Off

2. 3. Normal window wiper operation Intermittent window wiper operation

3. 4. Washer/wiper dual operation Normal window wiper operation

4. 5. Washer/wiper dual operation Washer/wiper dual operation

5. Type B Washer/wiper dual operation

Type B

1.   Off

1. 2.   Intermittent window wiper  Off

2. operation  Intermittent window wiper operation

3. 4.  Washer/wiper dual operation Normal window wiper operation

4.  5. Washer/wiper dual operation Washer/wiper dual operation

5. The rear window wiper and washer can be operated when Washer/wiper dual operation

The rear window wiper and washer can be operated when

• The “ENGINE START STOP” switch is in IGNITION ON mode.

• The glass hatch is closed.

If no windshield washer fluid sprays

Check that the washer nozzles are not blocked if there is washer fluid in the wind- shield washer fluid reservoir

NOTICE

When the rear window is dry

Do not use the wiper, as it may damage the rear window.

When the washer fluid tank is empty

Do not operate the switch continually as the washer fluid pump may overheat.

    See also:

    “Setup” screen
    The items shown on the “Setup” screen can be set. Press the “SETUP” button to display the “Setup” screen. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. ...

    Adjusting the sensitivity of the air intake control in automatic mode (vehicles with a rear automatic air conditioning system)
    Press for 2 or more seconds. Press “” (increase) or “” (decrease) on the temperature control button on the driver’s side. From - 3 (low) to 3 (high) can be set. ...

    Using the radio
    Select radio mode on the source screen to display the control screen. 1. Selecting a preset station 2. Tuning the station Selecting a preset station Push “ ” or “ ” of “DISC·CH ...